This entire document or the definition section may be freely copied provided that the text is reproduced in full, the source (British Standards Institution) acknowledged and the reference number of the document (DISC PD2000-1) is quoted.
THE DEFINITION
Year 2000 conformity shall mean that neither performance nor functionality is affected by dates prior to, during and after the year 2000.
In particular:
Rule 1. No value for current date will cause any interruption in operation.
Rule 2. Date-based functionality must behave consistently for dates prior to, during and after year 2000.
Rule 3. In all interfaces and data storage, the century in any date must be specified either explicitly or by unambiguous algorithms or inferencing rules.
Rule 4. Year 2000 must be recognized as a leap year.
AMPLIFICATION OF THE DEFINITION AND RULES
General Explanation
Problems can arise from some means of representing dates in computer equipment and products and from date-logic embedded in purchased goods or services, as the year 2000 approaches and during and after that year. As a result, equipment or products, including embedded control logic, may fail completely, malfunction or cause data to be corrupted.
To avoid such problems, organizations must check, and modify if necessary, internally produced equipment and products and similarly check externally supplied equipment and products with their suppliers. The purpose of this document is to allow such checks to be made on a basis of common understanding.
Where checks are made with external suppliers, care should be taken to distinguish between claims of conformity and the ability to demonstrate conformity.
Rule 1
1.1 This rule is sometimes known as general integrity.
1.2 If this requirement is satisfied, roll-over between all significant time demarcations (e.g. days, months, years, centuries) will be performed correctly.
1.3 Current date means today's date as known to the equipment or product.
Rule 2
2.1 This rule is sometimes known as date integrity.
2.2 This rule means that all equipment and products must calculate, manipulate and represent dates correctly for the purposes for which they were intended.
2.3 The meaning of functionality includes both processes and the results of those processes.
2.4 If desired, a reference point for date values and calculations may be added by organisations; e.g. as defined by the Gregorian calendar.
2.5 No equipment or product shall use particular date values for special meanings; e.g. "99" to signify "no end value" or "end of file" or "00" to mean "not applicable" or "beginning of file".
Rule 3
3.1 This rule is sometimes known as explicit/implicit century.
3.2 It covers two general approaches:
(a) explicit representation of the year in dates: e.g. by using four digits or by including a century indicator. In this case, a reference may be inserted (e.g. 4-digit years as allowed by ISO standard 8601:1988) and it may be necessary to allow for exceptions where domain-specific standards (e.g. standards relating to Electronic Data Interchange, Automatic Teller Machines or Bankers Automated Clearing Services) should have precedence.
(b) the use of inferencing rules: e.g. two-digit years with a value greater than 50 imply 19xx, those with a value equal to or less than 50 imply 20xx. Rules for century inferencing as a whole must apply to all contexts in which the date is used, although different inferencing rules may apply to different date sets.
General Notes
For Rules 1 and 2 in particular, organisations may wish to specify allowable ranges for values of current date and dates to be manipulated. The ranges may relate to one or more of the feasible life-span of equipment or products or the span of dates required to be represented by the organisation's business processes. Tests for specifically critical dates may also be added (e.g. for leap years, end of year, etc). Organisations may wish to append additional material in support of local requirements.
Where the term century is used, clear distinction should be made between the "value" denoting the century (e.g. 20th) and its representation in dates (e.g. 19xx); similarly, 21st and 20xx.
I'd really appreciate your feedback on this FAQ - so mail me and tell me what you think of it, if it's been useful to you, or let me know of any specific problem you have where I may be able to help.
This page was last updated 26 January, 1997.
No liability is accepted for any inaccuracy in the information in these pages - see full disclaimer
© Roger Sinclair and Egos Ltd - roger@egos.co.uk 1997 - All rights reserved - see full copyright details
The information on these pages is provided free and for information only, and is provided 'as is'. Whilst believed to be correct, it is in no way comprehensive. It is provided for your interest only and is not intended to be relied on as formal legal advice. The posting of information on these pages is not intended to create a lawyer-client relationship, and you should not act or rely on this information without seeking professional advice. No liability is accepted therefore for any errors, or for any losses that may be incurred if it is relied on.
You may read these pages on-line, and download them to read
later, for your own personal use.
This copyright notice must appear on every page that you print
from here.
You must not redistribute these pages or any part of them in any
form or medium without first obtaining my consent.
You are welcome to set up links to this website from others.